Brief Introduction
|
Accuracy: |
±2%,(1.0~16ft/s) |
Pipe Size: |
DN20~DN80 |
|
Power Supply: |
POE |
Key : |
4 keys |
Product Introduction
Gentosquick F3E is a POE-powered, Ethernet-cloud-connected, clamp-on ultrasonic flowmeter that uses transit-time technology and proprietary algorithms to deliver non-contact, four-step installation without process shutdown.
- Easy to install,without break pipe
- Easily clip on
- LCD color display
- HVAC (Heating, Ventilation, and Air Conditioning) systems
- Process industries (chemical, pharmaceutical, food and beverage)
- Energy management and environmental monitoring
- Agriculture and irrigation systems
- Research and development
- Commercial
- Industrial maintenance and troubleshooting
- Carbon footprint, carbon audit, carbon assessment, carbon neutrality, and carbon trading etc.
Product Parameter
Technical Parameters
|
Performance Index |
|
|
Velocity Range |
0.03m/s ~5.0m/s |
|
Accuracy |
±2% of RD |
|
Repeatability |
0.2% |
|
Pipe Size |
DN20, DN25, DN32, DN40, DN50, DN65,DN80 |
|
Medium |
Water |
|
Pipe Material |
Carbon Steel, Stainless Steel, Copper, PVC |
|
Function Index |
|
|
Communication Interface |
HTTP,MQTT Protocol |
|
Power Supply |
POE |
|
Keyboard |
4 Touch Keys |
|
Display Screen |
1.44"LCD colorful screen, Resolution 128*128. |
|
Temperature |
Transmitter:14°F to 122°F(-10℃~50℃) |
|
Humidity |
Relative humidity 0~99%, No condensation |
|
IP |
IP54 |
|
Physical Characteristics |
|
|
Transmitter |
Integrated |
|
Transducer |
Clamp On |
|
cable |
POE waterproof tail line, standard length: 0.5m |
Body Parameters
Appearance
Installation
FAQ
Q: Are you a trading company or a factory?
A: We have been focusing on ultrasonic flowmeters for 32 years and we are a well-known manufacturer integrating R&D and factory.
Q: What types of pipes are compatible with the F3E flowmeter?
A: The F3E supports carbon steel, stainless steel, copper, and PVC pipes with outer diameters ranging from DN20 to DN80 mm. Please refer to the pipe size chart in the manual for exact OD ranges.
Q: Does the F3E require pipe cutting or process shutdown for installation?
A: No. The F3E features a clamp-on design, allowing for non-invasive installation without interrupting flow or cutting the pipe. Simply clamp it on, tighten the screws, and connect the PoE cable.
Q: How is the F3E powered and how does it communicate?
A: The F3E is powered via PoE (Power over Ethernet) through a single network cable. It communicates using Ethernet (HTTP/MQTT) to upload flow data to the cloud, accessible via mobile or PC terminals.
Q: What is the measurable flow range and accuracy?
A: The F3E measures flow velocities from 0.03 to 5.0 m/s with an accuracy of ±2% in the range of 1.0–16 ft/s (0.3–5.0 m/s). Repeatability is 0.2%.
Hot Tags: ultrasonic flowmeter for hvac, China ultrasonic flowmeter for hvac manufacturers, suppliers, factory, BMS Meter, Chilled Water BTU Meter, electrical power monitoring system, Flow Meter for Marine, portable ultrasonic water flow meter, Waste Water Meter
Product Parameter
1)Technical Parameters
|
Performance Index |
|
|
Velocity Range |
0.03m/s ~5.0m/s |
|
Accuracy |
±2% |
|
Repeatability |
0.2% |
|
Pipe Size |
DN20, DN25, DN32, DN40, DN50, DN65,DN80 |
|
Medium |
Water |
|
Pipe Material |
Carbon Steel, Stainless Steel, Copper, PVC |
|
Function Index |
|
|
Communication Interface |
HTTP,MQTT Protocol |
|
Power Supply |
POE |
|
Keyboard |
4 Touch Keys |
|
Display Screen |
1.44"LCD colorful screen, Resolution 128*128. |
|
Temperature |
Transmitter:14°F to 122°F(-10℃~50℃) |
|
Humidity |
Relative humidity 0~99%, No condensation |
|
IP |
IP54 |
|
Physical Characteristics |
|
|
Transmitter |
Integrated |
|
Transducer |
Clamp On |