Waste Water Flow Meter

 

D118 is a state-of-the-art transit time waste water flow meter. Designed using the latest digital technology and low-voltage broadband pulse transmission. While principally designed for full-pipe clean liquid applications. The instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments. Comparing with other traditional flow meter or ultrasonic flow meter, it has distinctive features such as high precision, high reliability, high capability and low cost, other features like TVT technology designed. Less hardware components, low voltage broadband pulse transmission, low consumption power. D118 has clear, user-friendly menu selections make flow meter simple and convenient to use for waste water. The device can record daily, monthly and yearly totalized flow. Parallel operation of positive, negative and net flow totalizes with scale factor (span) and 7 digit display, while the output of totalize pulse and frequency output are transmitted via relay and open collector. This waste water flow meter can also measure the temperature up to 150 degrees of liquid, the sensor is the clamping-on type installation does not need to damage the pipeline and easy to install. The product D118 contains a variety of certificates of conformity, and will definitely be calibrated and tested before leaving the factory and issued the corresponding test report. Our after-sales service is also complete, and there are few quality problems.

 

 

Product Parameter
Flow range	±0.03ft/s ~ ±40ft/s (±0.01m/s ~ ±12m/s)
Accuracy	±0.5% of measured value (for ±1.5ft/s~±40ft/s)
Fluid	Water, Sea Water, Kerosene, Fuel Oil, Alcohol
Pipe material	Carbon steel, stainless steel, PVC, Aluminum, Cast iron
Pipe size	Clamp-on:1"to 200" (25mm to 5000mm)
Outputs	Analog output: 4~20mA, max load 750 . Pulse output: 0~9999Hz, OCT, (min. and max. frequency is adjustable) Relay output: SPST, max 1Hz,(1A@125VAC or 2A@30VDC)
Communication	RS232&RS485
Temperature	Transmitter: -14℉~122℉(-10℃~50℃) Transducer: -40℉~176℉(-40℃~80℃, standard)

 

 

Waste water Management: Flow meters are crucial instruments in the wastewater industry, aiding in the measurement and management of water flow in various processes. D118 is used to measure the flow of untreated wastewater entering wastewater treatment plants. This helps in assessing the volume of incoming wastewater and planning treatment processes accordingly. Similarly, flow meters are employed to measure the flow of treated wastewater leaving treatment plants. This is essential for compliance monitoring and ensuring that treated water meets regulatory standards before discharge. D118 is used in sludge handling processes to measure the flow rates of sludge within the treatment plant. This information aids in optimizing the treatment and disposal of sludge. Flow meters play a crucial role in controlling the dosing of chemicals in wastewater treatment processes. This includes measuring and regulating the flow of coagulants, flocculants, disinfectants, and other chemicals to optimize treatment efficiency. In activated sludge processes, flow meters are utilized to control the aeration rates. Proper aeration is crucial for promoting biological treatment and optimizing the removal of pollutants. D118 can installed in sewer systems to monitor the flow rates of wastewater in different sections of the network. This information helps in identifying areas with high or low flow, detecting blockages, and planning maintenance activities. It will assist in monitoring storm water flow rates to prevent overflow and flooding during heavy rainfall events. This is crucial for managing combined sewer systems and preventing the discharge of untreated wastewater. Flow meters are used to monitor the efficiency of pumps in wastewater treatment plants. By measuring the flow rates, operators can ensure that pumps are operating optimally and adjust settings as needed. It can employed to measure the flow rates of wastewater discharged by industrial facilities. This helps in regulating industrial discharges and ensuring compliance with environmental regulations. And it used to detect abnormal flow rates in sewer systems, which may indicate infiltration or inflow of groundwater or storm water. Identifying and addressing such issues helps in preventing system overloads. Flow meters are applied in systems that reuse treated wastewater for non-potable purposes. They measure the flow rates of reclaimed water, supporting sustainable water reuse practices. And provide accurate data for compliance reporting, ensuring that wastewater treatment plants adhere to regulatory standards and discharge permits. Waste water flow meter D118 in the wastewater industry contribute to efficient treatment processes, environmental protection, and regulatory compliance by providing accurate measurements and control over the flow of wastewater and associated parameters.

 

 

 

 

Gentos is committed to collaborating with clients to effectively utilize fluid resources, offering comprehensive solutions for energy conservation, emission reduction, minimizing fluid resource utilization losses, precise measurement, and enhancing the efficient utilization of fluid resources.

With the successful application of its transit-time patent technology, Gentos' ultrasonic flow metres find applications not only in traditional industries like the petroleum, water resources, chemical, urban heating, and power industries, but also in research institutions for measurement purposes.

At the same time, Gentos also pays attention to the development of employees, providing them with a clear promotion system and comprehensive training opportunities.

In terms of team structure, Gentos cultivates the advancement of seasoned workers while also introducing managerial talent gradually at different levels, resulting in a well-balanced mix of new and seasoned staff members to guarantee the company's constant and robust development.

Innovation is the hallmark of Gentos as we continuously search for the best fluid measurement technologies and applications for humanity, transforming them into standards and regulations for use in the field of fluid measurement.

 

Company environment display：

 

Certificate display：

 

Deliver, Shipping, and Serving

 

 

Nurturing seamless customer experiences, Gentos has implemented an expedited delivery system, ensuring prompt product acquisition. Effortlessly, Gentos expedites order processing and swift product dispatch within an efficient 2 to 3-day window. Featuring an extensive selection of transportation and express delivery options, Gentos caters to the unique preferences of each customer.

 

 

Q: Why is flow measurement important in waste water treatment?

A: Clamp-on ultrasonic flow meters are used to measure accurate waste water flow rates. Flow meters are also crucial to the clarification, filtration, and treatment stages. The flow must be carefully observed to adjust the number of coagulants and polymers needed for proper filtration.

 

Q: How is flow measured in most wastewater treatment plants?

A: Ultrasonic flow meters are popularly used to ensure precision flow measurement of wastewater streams. They are designed intelligently and constructed toughly to meet demanding applications in waste-water treatment plants.

 

Q: What is waste water flow monitoring?

A: Flow monitoring uses equipment to read and record flow depth and rate to determine if issues are resulting from inflow/infiltration (I/I), or both. Using the data gathered, it's possible to plan and design a sanitary sewer rehabilitation approach to correct (I/I) issues at targeted locations.

 

Q: Why is waste water monitoring important?

A: Wastewater monitoring is an early warning system for disease spread. Wastewater holds clues about outbreaks of diseases like COVID-19, polio, flu, and more before they happen. When experts test wastewater, they can notice if diseases are starting to spread more.

 

Q: What are the advantages of ultrasonic flow meters for measuring wastewater?

A: Ultrasonic flow meters offer a reliable and versatile solution for measuring wastewater flow. Their non-intrusive nature, accuracy, and adaptability make them well-suited for various applications within the wastewater management sector.

 

Hot Tags: waste water flow meter, China waste water flow meter manufacturers, suppliers, factory, BMS Meter, water meter with bms integration, Flow Meter for Marine, BMS Water Meter, semiconductor parts cleaning, electrical power monitoring system